FIZUAS › DJI Enterprise Payloads › DJI Zenmuse L3
DJI Zenmuse L3 LiDAR payload
DJI Enterprise · Authorized FIZUAS Distributor Texas & Nationwide

DJI Zenmuse L3
See Through, Far and True.

1535nm Long-Range LiDAR · Dual 100MP RGB · 950m Detection · 3cm Accuracy · Up to 100 km²/day

950m
LiDAR Range
100MP
Dual RGB Cameras
3cm
Point Cloud Accuracy
100km²
Daily Coverage
1535nm
Laser Wavelength
IP54
Ingress Protection
DJI Zenmuse L3
1 / 11
DJI Enterprise Payload

Zenmuse L3

Next-Generation High-Accuracy Aerial LiDAR System
950m
Detection Range
3cm
Vertical Accuracy
100MP
Dual RGB Cameras
1.60kg
System Weight
1535nm LiDARDual 100MP RGB3-Axis GimbalIP54RTK PrecisionClass 1 Laser
DJI’s first long-range, high-accuracy aerial LiDAR system. Integrates a 1535nm LiDAR, dual 100MP RGB mapping cameras, and a high-precision POS system — all in a compact 1.60 kg payload. Compatible with DJI Matrice 400. Enables daily coverage up to 100 km² with 3cm point cloud accuracy at 120m flight altitude.
Authorized DJI Enterprise Distributor. FIZUAS serves Texas statewide and customers nationwide. Expert consultation, demos, and training included. 5135 69th St Suite D, Lubbock TX 79424.
Performance at a Glance
Hardware Performance Redefined
Zenmuse L3 sets a new standard for aerial LiDAR — combining extreme detection range, dual high-resolution RGB cameras, and survey-grade positioning in one compact payload.
LiDAR Range
950m
1535nm Long-Range Detection
Detects objects at up to 950m with just 10% reflectivity at 100 kHz. Up to 2000m on 80% reflectivity targets.
Dual RGB Mapping
100MP×2
Dual 100MP RGB Mapping Cameras
Two 4/3 CMOS sensors with 45° optical axis angle deliver a combined 107° horizontal FOV. Average 3cm GSD at 300m.
Point Cloud Accuracy
3cm
Vertical Accuracy at 120m
3cm vertical RMSE and 4cm horizontal RMSE at 120m with RTK fix. 5cm vertical at 300m. Meets rigorous survey standards.
Coverage Capacity
100km²
Up to 100 km² Per Day
Enabled by high pulse rates up to 2000 kHz, fast flight speeds, and efficient dual-camera capture.
Pulse Rate
2000kHz
Maximum Pulse Emission Frequency
Four selectable rates: 100, 350, 1000, 2000 kHz — optimized for altitude bands from <50m to 500m.
Penetration
16rtn
Up to 16 Returns per Pulse
4, 8, or 16 returns per pulse at 100–350 kHz for exceptional canopy penetration and dense structure capture.
Key Capabilities
Built for the Toughest Geospatial Missions
From dense urban corridors to remote terrain, Zenmuse L3 delivers the data quality modern geospatial workflows demand.
Zenmuse L3 angle view
1535nm Long-Range LiDAR

See Further Than Ever Before

The L3’s 1535nm LiDAR reaches 950m on 10% reflectivity targets and 2000m on high-reflectivity surfaces. Wire detection at 300m. ±10mm ranging accuracy ensures every return is precise.

Zenmuse L3 side view
Dual 100MP RGB Mapping System

Photogrammetry-Grade Imagery, Every Flight

Two 4/3 CMOS sensors at 28mm equivalent focal length combine for a 107° composite FOV. Mechanical shutter, 100MP RAW or JPEG, and 4K video at 30fps.

Zenmuse L3 detail view
High-Precision POS System

Survey-Grade Positioning, Integrated

200 Hz POS, 5 Hz GNSS, 0.02° yaw and 0.01° pitch/roll attitude error. RTK horizontal accuracy 1.0 cm + 1 ppm. Works with D-RTK 3 Multifunctional Station for GCP-free surveys.

Zenmuse L3 in the box
End-to-End DJI Ecosystem

From Collection to Deliverable — All DJI

DJI Pilot 2 for collection, Terra for processing (LAS/LAZ/PLY/PCD), Modify for annotation, FlightHub 2 for fleet management. FIZUAS provides expert training on the full stack.

🌿
Multi-Return Canopy Penetration
Up to 16 returns per pulse cuts through dense vegetation to expose bare earth and ground features.
📡
Three Scanning Modes
Linear (80°×3°), Star-Shaped, and Non-Repetitive (80°×80°) modes for corridor, area, and dense capture.
💾
CFexpress Type B Storage
1500 MB/s sequential write handles simultaneous LiDAR, IMU, GNSS, RGB, and calibration data.
🔒
IP54 & Wide Temperature Range
Operates -20°C to 50°C with IP54 protection for dust, humidity, and field environments.
🎯
3-Axis Stabilized Gimbal
±0.01° accuracy. Pitch -120° to +60°, yaw ±80°. Precise alignment throughout dynamic flight.
⚡
Class 1 Eye-Safe Laser
1535nm wavelength, Class 1 per IEC 60825-1:2014. Safe near personnel and populated areas.
Technical Specifications
Full Specifications
Complete technical data for the DJI Zenmuse L3 payload system.
System
Weight
1.60 kg (excl. single gimbal connector; +145g with connector)
Dimensions
192×162×202 mm (L×W×H)
Power
64W typical · 100W max
Supported Aircraft
DJI Matrice 400 (requires single gimbal connector)
Ingress Protection
IP54
Operating Temp
-20° to 50°C (-4° to 122°F)
Vertical Accuracy
3cm RMSE @ 120m · 5cm RMSE @ 300m
Horizontal Accuracy
4cm RMSE @ 120m · 7.5cm RMSE @ 300m
RGB Camera FOV
107° combined horizontal (dual cameras)
RGB GSD
3cm average @ 300m nadir altitude
LiDAR
Laser Wavelength
1535 nm
Beam Divergence
0.25 mrad (1/e²)
Detection Range
700m @ 10% (350 kHz) · 950m @ 10% (100 kHz) · 2000m @ 80% (100 kHz)
Wire Detection
300m (21.6mm steel core) · 100m (18.4mm PVC)
Ranging Accuracy
±10mm absolute · <5mm repeatability (1σ)
Pulse Frequency
100 / 350 / 1000 / 2000 kHz
Returns per Pulse
4, 8, 16 (100–350 kHz) · 4, 8 (1000 kHz) · 4 (2000 kHz)
Scanning Modes
Linear (80°×3°) · Star-Shaped (80°×80°) · Non-Repetitive (80°×80°)
Laser Safety
Class 1 (IEC 60825-1:2014)
Min. Effective Range
10 m
RGB Mapping Camera
Sensor
4/3 CMOS (×2)
Focal Length
28mm equivalent
FOV (per camera)
73.3° diagonal · 62° horizontal · 41.2° vertical
Aperture
f/2.0 – f/11
Photo Resolution
100MP (12288×8192) · 25MP (6144×4096)
Shutter
Mechanical (500k actuations) + Electronic
Min. Photo Interval
0.5s (25MP JPEG) · 1s (100MP JPEG) · 1.2s (RAW)
Video
4K@30fps · FHD@30fps (H.265/MP4)
POS & Gimbal
GNSS Update Rate
5 Hz
POS Update Rate
200 Hz
Yaw Error
0.02° (post-processed, 1σ)
Pitch/Roll Error
0.01° (post-processed, 1σ)
RTK Positioning
H: 1.0cm+1ppm · V: 1.5cm+1ppm
Gimbal Axes
3-axis (pitch, roll, yaw)
Angular Accuracy
±0.01°
Controllable Range
Pitch: -120° to +60° · Yaw: -80° to +80°
Mounting
Detachable DJI SKYPORT (single gimbal connector)
Storage
CFexpress™ Type B (1500 MB/s write)
Use Cases
What You Can Do With the Zenmuse L3
From land surveying to powerline inspection, the L3’s range, accuracy, and dual RGB imaging opens up a wide mission set.
🗺
Land Survey & Cadastral Mapping
3cm vertical accuracy and RTK integration meets survey-grade requirements for boundary, topographic, and cadastral work.
🏗
Construction & Earthwork
100 km² daily coverage for progress tracking, volume calculation, BIM integration, and as-built documentation.
🌲
Forestry & Vegetation Analysis
16 returns per pulse penetrates dense canopy to reveal ground elevation, tree height, and biomass estimates.
⚡
Powerline & Utility Inspection
Wire detection at 300m and corridor mapping for vegetation encroachment analysis on transmission lines.
⛏
Mining & Quarry Survey
Stockpile volumes, highwall mapping, and site safety monitoring across large, active mine sites.
🌾
Precision Agriculture
Digital elevation models, drainage mapping, and crop height measurement for agronomic decision-making.
🏢
Urban Planning & Smart City
High-density 3D city models from LiDAR point clouds plus 100MP imagery for planning and digital twin creation.
🌇
Infrastructure & Bridge Inspection
Structural capture of bridges, dams, and civil assets with millimeter-level density and high-resolution photography.

Order Your Zenmuse L3 Today.

Available through FIZUAS — authorized DJI Enterprise distributor serving Texas statewide and customers nationwide. Expert consultation and training included.

Authorized DJI Enterprise Distributor · Texas & Nationwide